You turn on the shower, expecting a strong stream to wake you up. Instead, you get a weak, sad trickle. You check the kitchen sink. Same thing. It takes forever to fill a pot for pasta.
If you live in Manorville, you are not imagining it. And you aren't alone.
My phone is ringing off the hook with Manorville homeowners asking the same question: "Why did my water pressure die overnight?"
Let’s be real. It’s not a coincidence that this started happening right after the major infrastructure work on Floyd Road. Here’s the truth about what is actually happening in your pipes—and how to fix it without spending thousands on a plumber who might just put a band-aid on the problem.
According to the SCWA January 2026 Infrastructure Report, crews completed significant main replacements connecting the Shirley and Manorville grids in late January. While this work is necessary for long-term reliability, the immediate side effect is often a massive disturbance of sediment.
When they opened those valves back up, the hydraulic shock didn’t just push water through. It pushed decades of rust, sand, and mineral buildup through the mains and right into your service line.
In our 15+ years testing over 2,000 Long Island wells and municipal connections, we’ve found that Manorville plumbing systems are particularly sensitive to this. Why? Because many homes here have modern, high-efficiency fixtures with fine mesh screens.
Those screens are now choked with the sediment stirred up from the Floyd Road work. The result isn't that SCWA turned down the pressure. It's that your home is essentially "constipated" with sediment. Your water can't get through the grit clogging your aerators, your cartridges, and your appliances.
SCWA restores pressure, sending a surge of water through aging cast iron mains.
This surge lifts heavy iron deposits and sand that had settled over decades.
Debris travels into your home and blocks the tiny screens in your showerheads.
Water flow is physically blocked. You lose volume and pressure instantly.
Available this week only for residents affected by the Floyd Road/Dayton Ave infrastructure work.
📞 Call (631) 991-3995 to scheduleA lot of Manorville families react to this by switching to bottled water for drinking and just "living with" the bad showers. They stack cases of Poland Spring in the garage and hope the pressure comes back.
Here’s the math on that bad decision:
You are spending a fortune. And for what? According to a 2024 Columbia University study, bottled water contains an average of 240,000 detectable plastic fragments per liter. You aren't drinking pure water. You’re drinking microplastics.
We broke down the full cost in our detailed analysis of bottled water costs on Long Island and why you should stop paying for plastic.
While bottled water hurts your wallet, the sediment clogging your pressure hurts your home. Here is what happens when you ignore that "trickle" for too long:
This is where the Nell Whole-House Filtration System comes in.
The Nell System targets contaminants at the source—your main water line—before they ever reach your showerheads or appliances. Designed specifically for Long Island water challenges, it targets the exact sediment and iron issues causing the pressure drop in Manorville.
Here's what makes it different:
1. Salt-Free Technology
Traditional softeners use salt. Salt creates a slimy feel and requires you to haul 40-pound bags into your basement. The Nell System is salt-free. No slime, no heavy lifting, no sodium.
2. Mineral-Rich Water
We don’t strip out the healthy stuff. Your body needs calcium and magnesium. The Nell System targets the bad stuff while keeping the minerals that give water its fresh taste.
3. Whole-Home Protection
This isn't a pitcher in your fridge. This protects every single tap, shower, and appliance in your house. It stops the sediment before it can clog your tankless heater or shower valve.
What the Nell System targets:
| Feature | Bottled Water | Pitcher Filter | Nell Whole-House |
|---|---|---|---|
| Annual Cost | $1,800+ | $200+ | $0 (after install) |
| Targets Sediment? | No | Poor | Complete |
| Restores Pressure? | No | No | Yes |
| Protects Appliances? | No | No | Yes (extends life) |
| Convenience | Heavy lifting | Constant refilling | Unlimited |
| Microplastics Risk | High | Low | Zero |
| Whole-Home? | No | No | Yes |
The Henderson family lives on North Street in Manorville, right near the Dayton Avenue intersection. They were directly in the "sediment zone" following the Floyd Road pipe work.
Three days after the work finished, Mark Henderson called us. "My shower is basically dripping," he told me. "I thought SCWA turned the water off, but the neighbors have water. It's just... weak. And I see this fine brown grit in the toilet tank."
We tested their water the next morning. The pressure coming into the house was fine (60 PSI). The problem was inside. We found significant sediment buildup in their aerators and a layer of grit in their hot water heater. Their new washing machine was throwing an error code because the inlet screen was completely blocked.
We installed a Nell Whole-House System that Friday. Our plumbers flushed their lines and installed the unit to target the incoming sediment.
“It was instant,” Mark said when I checked in on Monday. "The shower pressure is actually better than it was before the pipe work. The water is clear, and we aren't getting that sandy feeling on our skin anymore."
The Hendersons are now saving roughly $160 a month they used to spend on bottled water and harsh cleaning chemicals. The system is paying for itself, and their expensive appliances are finally protected.
How much does a whole house water filter cost on Long Island?
It depends on your plumbing configuration. But when you factor in the $1,800+ you save annually on bottled water, the system typically pays for itself in 2-3 years. We offer 0% financing to make it easy. Call (631) 991-3995 for a free quote.
Do water filters target PFAS?
Yes. The Nell Whole-House System targets PFAS (forever chemicals) along with sediment and chlorine. With Manorville being close to the Peconic River and various industrial zones, testing for PFAS is smart. We can test for it during your assessment.
Why did my water pressure drop after the pipe work?
It’s almost certainly sediment. When SCWA disturbs the mains, it releases rust and sand. This debris travels to your home and physically clogs the tiny screens in your faucets, showerheads, and appliance valves. The pressure in the street is fine—the blockage is in your fixtures. A whole-house filter targets this sediment before it enters your home's plumbing.
How long will the sediment last?
Typically 6-12 weeks after major pipe work based on infrastructure data. But here is the catch: even after the water "clears," your fixtures are already clogged. The damage is done. A whole-house system prevents this from happening again during future maintenance.
Join 2,000+ Long Island families who have restored their pressure and gone plastic-free.
📞 Call (631) 991-3995Disclaimer: Water quality varies by location. Municipal water provided by SCWA achieved EPA compliance in June 2025. Private well owners should have water tested regularly. pHountain provides free water testing for Nassau and Suffolk County. Visit our FAQ page for more information.