How do I read my annual water quality report?

A simple groundwater-supply wellhead with a plain fitted metal cover rising from level earth.

On November 10, 2026, the U.S. Environmental Protection Agency stated, “EPA requires community water systems to deliver a Consumer Confidence Report” (EPA). In the same statement, EPA identified the report by another name: “an annual drinking water quality report” (EPA).

Quick answer

Start with system identification: the New York State Department of Health’s February 10, 2026, guidance required the report to identify the “water system’s name, address and public water system identification number (PWS ID#)” (NYSDOH). Next, find highest detected levels: the same guidance identified a “table that shows the highest level of each detected contaminant” (NYSDOH). For measurement units, NYSDOH said the MCLG and detected contaminant level “must be reported in the same units as the MCL” (NYSDOH).

Key points

  • Federal delivery deadline: EPA’s November 10, 2026, statement gave its federal annual deadline: “Reports must be sent by your water supplier each year by July 1” (EPA).
  • Previous reports: NYSDOH’s February 10, 2026, guidance said community water systems must “keep their reports on file for five years” and “make the reports available to the public upon request” (NYSDOH).
  • Detected-results table: The same NYSDOH guidance said that this table “must not include data that are not detected” (NYSDOH).

Find your report through your supplier

EPA’s November 10, 2026, instructions said you “can either call your local water supplier” (EPA). For another report-finding option, the same EPA instructions said, “you may also find your report using EPA’s CCR search tool” (EPA). pHountain’s Water Quality & Safety guide, dated October 25, 2026, also quoted this report-finding instruction: “Find and map a large public water system closest to you and view its Annual Drinking Water Quality Report” (pHountain).

Read the water source and treatment description

For a report’s water source, NYSDOH’s February 10, 2026, guidance instructed suppliers to “Describe the source of your water” (NYSDOH). The same guidance said “the source of their water may vary during the year” (NYSDOH). For the supplier’s treatment description, it requested a “description of the type(s) of treatment your water receives prior to distribution” (NYSDOH).

Check sample dates, detections and ranges

Sample dates and reporting periods

NYSDOH’s February 10, 2026, instructions described the normal reporting period as “data from monitoring completed during the past calendar year” (NYSDOH). For monitoring less often than once a year, the same instructions said “you must include the most recent data” (NYSDOH). For detected results outside the report’s stated calendar year, those instructions required “the report must include the sample date (month and year)” (NYSDOH). They also required an explanatory statement identifying the data as the “most recent monitoring done in compliance with regulations” (NYSDOH).

Detected results and ranges

For the meaning of detected, the same NYSDOH guidance stated, “A detected contaminant is any contaminant detected by a New York State approved laboratory” (NYSDOH). Nondetected information from compliance sampling, the guidance said, “must be included in the Annual Water Quality Report” (NYSDOH). Where compliance is based on an average of several samples, NYSDOH also requested the “range of levels of that contaminant you found during the year” (NYSDOH). If a supplement was prepared, the same instructions required the report to state that it was “available to the customer upon request” (NYSDOH).

Read violation notes and corrective actions together

As of February 10, 2026, NYSDOH’s reporting instructions said, “For any contaminant detected in violation of a MCL, or a TT, or exceeding an AL , clearly highlight in the table the violation or the exceedance” (NYSDOH). The same instructions placed the accompanying explanation “Near, but not in the table” (NYSDOH). For that explanation, NYSDOH specified the “length of the violation/exceedance” (NYSDOH). The instructions also called for “the actions taken to address the violation/exceedance” (NYSDOH).

If SCWA supplies your home, look for well-level detail

On April 14, 2025, the Suffolk County Water Authority described its earlier reporting this way: “Traditionally, water quality information was presented by pressure zones in SCWA’s annual Drinking Water Quality Report” (SCWA). The same announcement said, “While this reporting met regulatory standards, it sometimes generalized results across large areas” (SCWA). Describing its address-based tool at that time, SCWA said, “Customers simply input their address and receive detailed reports on water quality, specifically from the wells that serve them” (SCWA).

The Suffolk County Water Authority also described the size of its water supply in the April 14, 2025, announcement: “more than 600 wells across 243 different sites throughout Suffolk County” (SCWA). Explaining which wells typically supply customers, the same announcement said, “Because SCWA’s system is designed with limited movement of water, customers typically receive water from a small group of wells located nearest to them” (SCWA).

Background on Long Island’s water supply

pHountain’s Water Quality & Safety guide, dated October 25, 2026, quoted the U.S. Geological Survey: “Groundwater is the sole source of freshwater supply in Nassau and Suffolk Counties on Long Island” (pHountain). For the location information in a supplier’s report, NYSDOH’s February 10, 2026, guidance requested the “general locations of your water source(s)” (NYSDOH).

Background on limits and measurement units

Limits, goals and action levels

NYSDOH’s guidance, as of February 10, 2026, defined a maximum contaminant level (MCL) as “The highest level of a contaminant that is allowed in drinking water” (NYSDOH). The same guidance defined a treatment technique (TT) as “A required process intended to reduce the level of a contaminant in drinking water” (NYSDOH).

An action level (AL) was defined in the same instructions as “The concentration of a contaminant that, if exceeded, triggers treatment or other requirements which a water system must follow” (NYSDOH). For maximum contaminant level goals, or MCLGs, pHountain’s Common Contaminants guide said, as of October 25, 2026, that “goals are not enforceable” (pHountain). By contrast, the same guide stated that “MCLs are enforceable standards for public water systems” (pHountain).

Measurement units

For parts per million, the same NYSDOH guidance used “one part of liquid in one million parts of liquid (parts per million – ppm)” (NYSDOH). For parts per billion, it used “one part of liquid in one billion parts of liquid (parts per billion – ppb)” (NYSDOH).

Questions to take to your public water supplier

Keep the report, your water bill and a blank question list beside you as you review. Use the Water Quality & Safety and Common Contaminants education pages to help choose the terms you want your supplier to explain.

  1. Confirm your report. Compare the report’s system name and identification number with the supplier information on your bill. If you cannot match them, ask your public water supplier to confirm which report to use for your account and address.
  2. Request the latest copy. Write down the report’s title, reporting year and publication date, if shown. When requesting another copy, ask for the latest available report and specify whether you also want a previous year’s report for comparison.
  3. Mark unfamiliar abbreviations. Flag every abbreviation you cannot explain in your own words, including any unfamiliar column heading. Ask your supplier to spell out each one and point to the definition used for that particular result.
  4. Clarify sample dates. Circle any sample date that seems out of step with the report’s year. Ask when that sample was collected, why that date appears, and where to find the explanation accompanying that result.
  5. Keep labels together. For any entry you want to discuss, copy the row label, result, unit and stated comparison value together. Ask your supplier to explain the entry using those exact labels rather than a number copied without its heading.
  6. Ask about calculations. If a reported range is unclear, ask which samples contribute to it and which reporting period it covers. Request an explanation of the calculation used for the entry you are reading, without substituting your own calculation.
  7. Ask about your address. Ask which results and source descriptions apply to your address, and whether you should request an additional well-level report or supplement. If you use an address-search tool, ask your supplier how to interpret the report it returns.
  8. Clarify corrective-action notes. Flag any violation or exceedance note you do not understand, without assuming an explanation. Ask about the stated duration, the corrective actions described, and where to look for any subsequent written update.
  9. Request referenced material. Ask where to find information about results not displayed in the detected-results table. If an expected heading or explanation is missing from your copy, request the complete report and any referenced attachments before drawing a conclusion.
  10. Save the explanation. Keep your questions next to the exact pages, rows or notes that prompted them. Ask your supplier to identify the corresponding passage in its response, then save that explanation with the report for your next review.

An optional next step

pHountain offers a free in-home water test, with no obligation.

Information on our website about water quality, health benefits, or filtration performance is provided for general educational purposes only and does not constitute medical, legal, or engineering advice.

Works Cited