5 Checks for Reading Hicksville’s Water Project Costs

Close-up of a clean metal pipe connected to a large cylindrical vessel via a bolted flange.

The district’s financial record

In its undated retrospective, the district reported, “From 2020 through 2025, the District invested $72,594,273 in capital improvement projects” (Hicksville Water District). When reviewing Hicksville water treatment project costs, start by writing the reporting period beside each figure and leaving space for the project description, document date and any questions you want answered.

Figures to keep separate

  • Engineering estimate: In its undated retrospective, the district stated, “Engineers estimated these capital improvements to cost $95 million” (Hicksville Water District).
  • Earlier renovation: The same retrospective stated, “The District completed a $4.3 million renovation of Plant 6 in 2013” (Hicksville Water District).
  • Residential rates: In that undated retrospective, the district reported that “water rates for residential accounts have not gone up since 2021” (Hicksville Water District).

1. Check the scope behind the estimate

In its undated retrospective, the district described the scope this way: “The capital improvements centered on the installation of new treatment technology consisting of a combination of the Advanced Oxidation Process (AOP) and Granular Activated Carbon (GAC)” (Hicksville Water District). Before comparing the estimate with another amount, ask for the project scope and identify exactly which improvements the estimate covers. Request a final expenditure document before entering an estimated amount in a column labeled final cost, and ask whether any comparison should cover an individual facility or a broader group of projects.

In its undated ribbon-cutting announcement, Hicksville Water District described the “opening of its Plant 6 water treatment facility” (Hicksville Water District). For Plant 6 costs, the same announcement reported “approximately $13 million in costs associated with getting Plant 6 online” (Hicksville Water District). The district stated that “$2 million was funded through the federal Bipartisan Infrastructure Law” (Hicksville Water District). It also stated that “$3 million was funded by the New York State Water Infrastructure Improvement grant program” (Hicksville Water District).

Equipment and project milestones

For Plant 6 equipment, the same announcement listed “two Advanced Oxidation Process (AOP) treatment systems and four Granular Activated Carbon (GAC) filters to treat 1,4-dioxane and PFAS” (Hicksville Water District). Describing the project’s completion, the district reported, “With this project now complete, all 13 of the District’s 14 supply wells that have been affected by these contaminants now have the treatment technology necessary to distribute safe, high-quality drinking water to homes and businesses” (Hicksville Water District).

In its undated retrospective, the district also reported, “In May of 2022, the HWD cut the ribbon on new treatment technology at Plant 5” (Hicksville Water District). For that facility, the retrospective listed “two Advanced Oxidation Process (AOP) treatment systems and four Granular Activated Carbon (GAC) vessels that remove emerging contaminants such as 1,4-dioxane and PFAS from drinking water before it is distributed to residents’ homes” (Hicksville Water District).

2. Check the reporting period and annual median

The district’s undated retrospective reported “a median spend of $12,750,225.50 per year” (Hicksville Water District). Give the annual median its own line in your notes, separate from the cumulative investment figure, and retain the district’s wording rather than substituting a different statistical label. Ask for dated annual expenditure records if you want to examine individual years, and leave those entries unanswered until you have the corresponding documents rather than calculating or assigning yearly amounts yourself.

3. Check what the earlier renovation included

For the earlier renovation, the district’s undated retrospective listed “the installation of a new nitrate and Volatile Organic Compound (VOC) removal tower” (Hicksville Water District). For that same renovation, the district also listed “the upgrade of piping equipment and electrical controls” (Hicksville Water District).

Keep those quoted descriptions beside the earlier renovation entry rather than copying them into the description of a later project. When asking for clarification, name the particular equipment or controls in question and request the corresponding project record before combining historical renovation expenses with any later estimate or expenditure total.

For the site’s earlier history, the district’s undated retrospective stated, “Two wells at Plant 6 on Kuhl Avenue were drilled in 1952” (Hicksville Water District). For the start of construction, the same retrospective reported that work at “Plant 6 began in 2023 with a ceremonial groundbreaking” (Hicksville Water District). For the construction endpoint, the district reported, “Construction on Plant 6 concluded in 2025” (Hicksville Water District).

4. Check the wording of budget statements

In its undated retrospective, the district characterized its approach by stating, “We take fiscal responsibility very seriously” (Hicksville Water District). In the same statement, the district reported that “annual budget increases have been held to a minimum over the last six years” (Hicksville Water District).

Treat the district’s budget wording as an attributed statement, and ask for the document’s publication date before assigning calendar years to that six-year reference. Request dated adopted budgets and rate schedules, then write down which document you would need to answer a question about a particular billing period rather than using the statement to project a future household bill.

5. Check the annual water quality report separately

In its PFAS guide dated October 25, 2026, pHountain quoted the annual-report delivery requirement: “Reports must be sent by your water supplier each year by July 1” (pHountain). The same guide described a report entry as “The regulated contaminant found in local drinking water” (pHountain).

The guide also reproduced the report-finding direction, “Find and map a large public water system closest to you and view its Annual Drinking Water Quality Report” (pHountain). Request your public water supplier’s latest annual report and check its reporting year and results separately from the financial documents. For the separate infrastructure account, consult Hicksville’s PFAS treatment milestones, and keep your questions about project expenditures on a different page from your questions about reported water-quality results.

Background: Limits and monitoring terms to look up

Definitions and monitoring language

In its 1,4-dioxane guide dated October 25, 2026, pHountain reproduced the MCL definition: “The highest level of a contaminant that is allowed in drinking water” (pHountain). The same guide quoted the monitoring requirement: “Public water systems in New York must monitor for more than 100 different contaminants on a regular schedule, including PFOA, PFOS and 1,4-dioxane” (pHountain).

In its PFAS guide dated October 25, 2026, pHountain explained the abbreviation: “PFAS stands for per- and polyfluoroalkyl substances” (pHountain). In that guide, pHountain reproduced the description, “PFAS are widely used, long lasting chemicals, components of which break down very slowly over time” (pHountain). The guide also reproduced this description: “There are thousands of PFAS chemicals, and they are found in many different consumer, commercial, and industrial products” (pHountain).

State limits and the dated legislative record

For the state limits, pHountain’s PFAS guide stated, “In 2020, New York State set MCLs of 10 parts per trillion (10 ppt) for PFOA and PFOS, and 1 part per billion (1 ppb) for 1,4-dioxane” (pHountain). On the subsequent legislative record, the same guide stated, “In June 2026, the New York State Legislature passed bill S3207B, which would lower the state limits for PFOA and PFOS to no higher than 4 parts per trillion” (pHountain). The guide preserved the bill’s status with the qualification, “as of October 25, 2026, the Senate’s record showed it passed by both houses and not signed into law” (pHountain).

Federal rule dates and proposal wording

As of October 25, 2026, pHountain’s PFAS guide recounted the federal announcement: “On April 10, 2024, EPA announced the final NPDWR for six PFAS” (pHountain). The guide described the earlier rule this way: “EPA’s April 2024 rule set limits of 4.0 parts per trillion (ppt) each for PFOA and PFOS, with compliance due by 2029” (pHountain).

For monitoring under that rule, the guide quoted, “Public water systems must monitor for these PFAS and have three years to complete initial monitoring (by 2027), followed by ongoing compliance monitoring” (pHountain). For public reporting, the guide quoted, “Water systems must also provide the public with information on the levels of these PFAS in their drinking water beginning in 2027” (pHountain).

The same guide described a proposed deadline change: “in May 2026 EPA proposed letting water systems request two more years, to 2031” (pHountain). For the federal proposals’ status, the guide stated, “Both proposals were still proposals when EPA last updated its pages on October 8, 2026” (pHountain).

Environmental background from the 1,4-dioxane guide

In its October 25, 2026, 1,4-dioxane guide, pHountain reproduced the description, “1,4-Dioxane is a trace contaminant of some chemicals used in cosmetics, detergents, and shampoos” (pHountain). On behavior in water, the same guide quoted, “In water, 1,4-dioxane is stable and does not break down” (pHountain). On movement through soil, it quoted, “In soil, 1,4-dioxane does not stick to soil particles, so it can move from soil into groundwater” (pHountain).

For local groundwater context, the guide reproduced the statement, “Groundwater is the sole source of freshwater supply in Nassau and Suffolk Counties on Long Island” (pHountain). On groundwater findings, the same guide quoted, “1,4-dioxane has been found in groundwater at sites throughout the U.S., particularly in Long Island’s sole source aquifer and in association with legacy industrial and hazardous waste sites” (pHountain).

Federal drinking-water status for 1,4-dioxane

As of October 25, 2026, pHountain’s 1,4-dioxane guide stated, “At the federal level, there is no national drinking water regulation for 1,4-dioxane” (pHountain). The same guide stated, “It appears on EPA’s fifth Contaminant Candidate List (CCL 5)” (pHountain). For that list’s definition, the guide reproduced the wording, “a list of contaminants that are currently not subject to any proposed or promulgated national primary drinking water regulations but are known or anticipated to occur in public water systems” (pHountain).

Product-rule dates and units

For product limits as of October 25, 2026, pHountain’s 1,4-dioxane guide stated, “Since December 31, 2023, the limit for household cleansing and personal care products has been 1 part per million (ppm)” (pHountain). For cosmetics, the same guide stated, “since December 31, 2022, the limit for cosmetics has been 10 ppm” (pHountain). On the waiver timeline, the guide stated, “Temporary waivers for manufacturers ended on December 30, 2025” (pHountain).

What to request and compare

Build a document list before comparing amounts

Request the document date, complete project description and expenditure period for each financial figure you want to compare, and record the document title beside the amount rather than relying on an isolated number. Ask which facilities, contracts or improvement categories belong within each entry, and leave a question beside any figure whose scope you cannot establish from the document itself.

Keep separate columns for the district’s exact label, the quoted amount, the reporting period and the supporting document, then add a column for questions that still need a response. Before combining entries, ask explicitly whether they overlap, whether one includes another and which dated record should be used to confirm the comparison you are trying to make.

Separate financial questions from water-quality questions

Request the latest annual water quality report alongside the financial records, but keep a separate set of notes for its reporting year, listed results and any explanations you want your public water supplier to clarify. Write your questions next to the relevant entry and include the page number when requesting an explanation, rather than asking for a general conclusion about the entire document.

For terminology, consult the PFAS education page and the 1,4-dioxane education page, then return to the dated record for the particular figure you are reviewing. When checking a quoted limit, write down the substance, unit, document date and stated regulatory status before placing it beside another limit or using it in a question about a project.

Prepare a focused follow-up request

Use the water quality and safety education page to organize questions for further reading, and keep the wording of each question specific to the document you want explained. For local navigation, open the Nassau County page without substituting it for the district records, expenditure documents or annual report you have requested.

Before sending your follow-up, identify whether you are asking about an estimate, a recorded expenditure, an annual budget, a rate schedule or a reported water-quality result, and request the matching document. Ask for the source date and supporting page for any answer that introduces a new figure, then retain the response beside your original question so you can revisit the comparison without reconstructing your notes.

Laboratory testing and the free in-home water test

In its PFAS guide dated October 25, 2026, pHountain reproduced the Department of Health’s laboratory description: “PFAS tests are performed by a small number of certified laboratories that have specialized equipment and quality control procedures” (pHountain). Measuring PFAS and 1,4-dioxane at the levels regulators use (parts per trillion and parts per billion) requires analysis by a certified laboratory; a free in-home water test is a starting point for understanding your water and your options. pHountain offers a free, no-obligation in-home water test.

Information on our website about water quality, health benefits, or filtration performance is provided for general educational purposes only and does not constitute medical, legal, or engineering advice.

Works Cited

Call Request a Free Water Test